Valuation

SDE vs EBITDA: Which Earnings Measure Fits Your Sale

SDE vs EBITDA explained: how each is calculated, which buyers use them, and how each changes valuation for owner-operated and larger businesses.

SDE vs EBITDA: Which Earnings Measure Fits Your Sale
Written by:

Steve McKinney

Published:

Nov 15, 2026

The first piece of advice most sellers hear is tidy. Use SDE under $2 million and EBITDA above it. That cutoff is a market habit, not a test of who will run the company after closing. In an SDE vs EBITDA comparison, the number that moves value is the replacement-manager cost, and most side-by-side writeups skip it.

Seller's discretionary earnings (SDE) adds one working owner's pay back into earnings. EBITDA leaves a wage in the expenses for someone who has to do that job. Same routes, same trucks, same revenue. A buyer who will dispatch, cover drivers, and answer the customer changes the cash they can take home. A roll-up that must hire a supervisor does not get that same dollar.

Neither metric is universally correct. The one that fits is the figure the buyer who will operate the business can defend, to a lender and to themselves.

SDE and EBITDA at a Glance

SDE estimates what one working owner can take from the business. EBITDA estimates the operating profit left after paying someone to run it.

MetricStarting pointOwner pay treatmentBuyer it suitsQuestion it answers

SDE

Pretax earnings

Owner salary and benefits added back (one owner)

Owner-operators who will work the business

What can one owner receive from this business?

Adjusted EBITDA

Pretax earnings

Market-rate replacement manager kept as an operating cost

Strategic buyers, private equity, roll-ups

What operating profit remains after paying someone to run it?

The Corporate Finance Institute's explanation of seller's discretionary earnings treats the two measures as answers for different buyers, not as two names for the same profit.

SDE is built for an owner-operated company. It generally starts with pretax earnings and adds back interest, taxes, depreciation, amortization, one-time expenses, and the full compensation and benefits of one working owner. The result is the annual financial benefit available to an owner-operator.

EBITDA is earnings before interest, taxes, depreciation, and amortization. The cost of professional management stays an operating expense. It does not hand the owner's job back as free cash.

Where the two numbers split

Say a delivery operation reports $250,000 of EBITDA and pays its owner-manager $100,000 in salary and benefits. SDE could be about $350,000, if that pay is a legitimate add-back and nothing else changes. Revenue and route costs did not move. Owner labor did.

That split matters for FedEx route and logistics sellers. A buyer who will personally operate the business may underwrite SDE. A roll-up, a private-equity-backed platform, or a strategic acquirer usually looks at manager-replaced earnings and EBITDA. Using SDE on a company that needs hired management overstates transferable cash flow. Using EBITDA on an owner-run company understates what the seller takes home.

Ask one question before you pick a metric. Can this business run without the owner doing the daily work?

If the answer is no, SDE describes the owner's benefit, not the cash a hired manager leaves behind.

How to Calculate SDE and Adjusted EBITDA

The replacement manager's cost can change the comparison more than any discretionary add-back. Build both measures from the same year-end profit and loss statement or tax return, then account for owner compensation according to who will run the business after closing.

An infographic outlining the four-step process to calculate SDE and adjusted EBITDA for business valuation.

  1. Start with pretax profit. In this example, it is $180,000. If the owner's salary was paid through payroll, it has already reduced pretax profit, so account for it only in the appropriate later calculation.
  2. Add back interest, income taxes, depreciation, and amortization. The example adds $70,000, bringing reported EBITDA to $250,000. These adjustments remove financing and non-cash charges, not the cost of operating the business.
  3. To calculate SDE, add the salary, payroll taxes, and benefits of one working owner to reported EBITDA. The $100,000 owner compensation package brings SDE to $350,000. Add back only one owner's compensation. Another family member's pay qualifies only if that role and cost will disappear.
  4. Add one-time or non-recurring expenses only when records support the adjustment. A legal settlement, relocation, unusual vehicle repair, or personal expense paid by the business may qualify. Recurring truck maintenance does not.
  5. To calculate adjusted EBITDA, account for the work the owner performed. Add back the owner's compensation, then deduct the market-rate cost of a replacement manager. In this example, that cost is $120,000.
  6. Support each adjustment with invoices, payroll records, or bank statements before presenting the figures to buyers. Organized records, including records maintained through monthly bookkeeping services, make it easier to distinguish owner draws, personal card charges, one-time repairs, and recurring route costs.

Line itemAmountUsed for SDEUsed for adjusted EBITDA

Pretax profit

$180,000

Starting point

Starting point

Add back interest, taxes, depreciation and amortization

$70,000

Added back

Added back

Reported EBITDA

$250,000

Subtotal

Subtotal

Owner salary and benefits

$100,000

Added back

Added back, then replaced

Market-rate replacement manager

$120,000

Not deducted

Deducted after the owner-pay add-back

Resulting earnings


$350,000

$230,000

Don't count the owner twice

Reported EBITDA of $250,000 already reflects the $100,000 owner salary. To calculate adjusted EBITDA, add that compensation back, then deduct the $120,000 replacement-manager cost. The result is $230,000. Subtracting $120,000 from reported EBITDA counts the owner's labor twice and produces $130,000.

Two documentation gaps can undermine an adjustment. Owner pay that never ran through payroll has no matching W-2. A personal vehicle treated as a business truck needs support such as mileage records, title, or evidence of route use. Without documents, leave the amount out.

Which Buyers Use Each Earnings Measure

The buyer's operating plan picks the metric. The higher number is not the offer.

An owner-operator who will work the route underwrites SDE. They are buying the owner's labor along with the contracts. The salary add-back is cash they expect to keep, or to take partly as a wage and partly as profit.

Search funds, independent sponsors, and strategic acquirers that will install a manager use adjusted EBITDA after the replacement cost. They are not stepping into the daily job. A private-equity platform or a roll-up almost always starts from adjusted EBITDA for the same reason. The platform already has, or will hire, people to dispatch and supervise.

What the lender will count

Financing adds a third cut. As Nextax Advisory's comparison of SDE and EBITDA describes it, under the post-June-2025 SBA framework, debt-service coverage uses EBITDA-like operating cash flow. Lenders expect a justification for adjustments such as capital expenditures, non-recurring items, distributions, and owner draws. A seller's add-back list is not the coverage test. How those adjustments survive underwriting standards is what decides the loan, not the headline earnings label.

On FedEx ISP, TSP, and local logistics deals, route density, dispatching, driver supervision, compliance, and customer management often sit with the owner. If that work leaves with the seller, the buyer's staffing plan changes next year's cash, even when last year's SDE matches a neighbor's.

Price the same company three ways.

  • Owner-operator SDE. The buyer does the daily work, so one owner's pay stays in the benefit.
  • Manager-replaced adjusted EBITDA. A market wage for a supervisor or general manager comes out before any multiple.
  • Buyer-specific cash flow after debt service. Start from the operating figure the lender will accept, then subtract debt service and the reinvestment that routes require.

Two companies with the same SDE can support very different prices once owner dependence and staffing depth are on the page.

The question to write at the top of the model is the one buyers underwrite. What role will this buyer perform, and what replacement labor has to come out?

Valuation Multiples by Deal Size

A multiple is meaningful only when its earnings basis matches the one used in the comparison. A deal priced at 3x SDE is not directly comparable to one priced at 4x EBITDA: EBITDA generally reflects the cost of replacing the owner's operating role, while SDE includes one owner's compensation and benefits.

A bar chart illustrating median business valuation multiples for various deal sizes, comparing SDE and EBITDA metrics.

Transaction sizeQ2 2026 median multipleEarnings basisApproximate 2025 range

Below $500,000

2.0x

SDE

2.0x

$500,000 to $1 million

2.8x

SDE

2.8x to 3.0x

$1 million to $2 million

3.1x

SDE

3.0x to 3.3x

$2 million to $5 million

4.0x

EBITDA

3.5x to 4.1x

$5 million to $50 million

5.8x

EBITDA

Not stated

The IBBA and M&A Source Q2 2026 Market Pulse reports the medians in the table: 2.0x, 2.8x, and 3.1x SDE across the three sub-$2 million bands, then 4.0x and 5.8x EBITDA for the two larger bands. These are transaction-level medians, not fixed pricing rules. Near a band boundary, compare both neighboring bands and check that the earnings basis fits the buyer's operating plan.

One multiple, one earnings base

At $350,000 of SDE, a 2.8x multiple implies about $980,000 in value. To compare that business on an EBITDA basis, first subtract the market cost of replacing the owner's work. The replacement cost can materially reduce the earnings figure before an EBITDA multiple is applied.

That adjustment matters because the buyer's role determines which measure is relevant. An owner-operator may underwrite the earnings available to one working owner; a buyer relying on hired management needs to account for that labor. Bizbe benchmarks seller valuations against comparable closed deals and matches buyers to businesses. A business valuation rule of thumb is useful only when the earnings measure and the buyer's operating plan are clear.

State the earnings basis, add-backs, owner's role, and replacement-management cost when comparing offers. Without those details, two quoted multiples may describe different cash flows.

Where the $2 Million Rule Breaks Down

The $2 million cutoff is a rough convention, not a switch that automatically changes the right earnings measure. The buyer's role matters more: an owner-operator may value the cash flow available from running the business, while a buyer hiring a manager needs to account for that role's cost.

An illustrative comparison between SDE and EBITDA valuation concepts shown with a landscape scene and signage.

A business with $1.5 million of SDE and substantial owner involvement may suit a buyer who plans to take over day-to-day operations. For a manager-run buyer, first subtract the market cost of replacing the owner. The resulting adjusted EBITDA may support a different valuation discussion, even when the business's size is unchanged.

Consider the buyer questions behind each price: Will the new owner perform the seller's role? If not, what will it cost to hire someone who can? Are supervisors, established processes, and transferable contracts already in place? Those answers determine whether SDE or adjusted EBITDA better reflects the earnings available to that buyer.

Show both bases when the buyer pool is uncertain:

  1. Start with SDE.
  2. Subtract the market replacement-manager cost to calculate adjusted EBITDA.
  3. Estimate value for an owner-operator, a strategic buyer, and an institutional buyer.
  4. Label each estimate with its buyer type and earnings basis.

A multiple only makes sense alongside its earnings measure and the buyer's operating plan. The replacement-manager cost can change the earnings base enough to make two apparently similar valuations incomparable. Choose the metric that reflects who will run the business after closing.

Common Mistakes When Mixing SDE and EBITDA

Mixing the two metrics creates offers that look precise and are not comparable. Four mistakes account for most of the damage.

Putting an EBITDA multiple on SDE. SDE still includes the economic benefit of the owner's job. That multiple was observed on earnings after management is paid. Normalize to adjusted EBITDA before you use it, or the price overstates what a manager-run buyer can take.

Adding back pay or personal costs you cannot trace. Owner compensation that never hit payroll, and personal spending with no invoice, will not survive a buyer's questions. Match each add-back to payroll, an invoice, or a bank line. A personal vehicle booked as a business truck is the usual example. A quality of earnings report is where unsupported items get pulled back out.

Comparing companies while debt, working capital, fleet replacement, and one-time costs stay buried. The SCORE comparison of EBITDA and SDE makes the practical point that those items have to be normalized before a route's SDE multiple is set next to a platform's EBITDA multiple. List them beside the earnings number before any multiple is applied.

Printing both figures in one listing without saying which one the price uses. Lead with one basis. Show the other only as a reconciliation.

Use the supervisor check for the arithmetic. A business with $200,000 of SDE that needs a $50,000 replacement supervisor has about $150,000 of normalized earnings before other adjustments. At 3.1x on SDE the implied value is about $620,000. At 4.0x on the $150,000, it is about $600,000. The multiples looked far apart. Once owner labor is treated the same way, they nearly meet. A gap that remains after that normalization is usually an unsupported add-back or omitted reinvestment, not a clever multiple.

Choose the Metric Your Buyer Will Underwrite

Lead with the earnings measure the buyer who will run the business can underwrite.

A chart explaining whether to use SDE or adjusted EBITDA based on the type of business buyer.

  1. If that buyer will do the daily work, lead with SDE and attach adjusted EBITDA as a backup.
  2. If a manager must be hired after closing, lead with adjusted EBITDA after the market replacement cost.
  3. If the buyer is lender-backed or institutional, show both figures with a line-by-line reconciliation, including the debt-service view.

Finish this before a listing or an offer. The year-end P&L ties to the tax return. The owner's weekly hours and tasks are written down. Every add-back has a document. A market-rate manager or dispatch-supervisor cost is estimated. The likely buyer type is named first. Put the earnings basis, the add-backs, the owner role, and the replacement cost on page one of any offer. Confirm the add-backs with an accountant before you negotiate price.

This week, build the two-column reconciliation from the worked example and circle the column that matches the buyer who will operate the business. We offer a free valuation for sellers, and valuing a business, listing it, or getting verified as a buyer costs nothing, so you can test that column against closed-deal context before you name a price.


Bizbe, Inc. helps Main Street and logistics owners put SDE and adjusted EBITDA on the basis the buyer will underwrite, with valuations benchmarked to comparable closed deals and buyers matched to the operating plan. If you are preparing a FedEx route or a local operation for sale, start with a free seller valuation and see which earnings column your buyer can support. Visit Bizbe, Inc. to run that comparison before you set a price.